Founders

Independent contractor agreements for startups: key terms

An independent contractor agreement is a written contract between a company and someone who runs their own business and does work for it. It sets scope, pay, term, confidentiality and ownership of the work. It does not decide the worker’s legal status, because tax and labor agencies look at how the relationship actually works. This page is general information, not legal or tax advice.

Independent contractor or employee: what the tests look at

Regulators judge the working relationship, not the label. Each jurisdiction has its own test, so the rules below are labeled by country.

United States, IRS (federal tax). The IRS common-law test weighs the evidence of control and independence in three groups: behavioral control (does the company direct what the worker does and how), financial control (who sets pay, reimburses expenses and supplies tools) and the type of relationship (written contracts, benefits, whether the work will continue and whether it is a key part of the business). The IRS page, last reviewed May 19, 2026, says no single factor decides the question and that businesses should document the factors they relied on. It also says a business that treats a worker as a contractor without a reasonable basis may owe employment taxes for that worker.

United States, Department of Labor (wage and hour law). The DOL’s Fact Sheet 13, revised March 2024, lists six economic reality factors: opportunity for profit or loss, investments, permanence, control, whether the work is integral to the business, and skill and initiative. It says job titles, signed contracts and 1099 forms do not settle the matter. The same fact sheet says the 2024 rule remains in effect for private lawsuits while its legality is in litigation, and points to Field Assistance Bulletin 2025-1 for the agency’s enforcement position. It also notes a February 26, 2026 proposal to replace the rule.

The rule is changing. As of November 2026, the DOL’s misclassification page says the department announced a final rule on November 19, 2026 that rescinds the 2024 rule (89 FR 1638). The Federal Register record for the new rule (91 FR 75646, “Employee or Independent Contractor Status Under the Fair Labor Standards Act, Family and Medical Leave Act, and Migrant and Seasonal Agricultural Worker Protection Act”) lists publication on November 23, 2026 and an effective date of January 22, 2027, which matches the DOL’s “60 days after publication” wording. The guidance will sit in 29 CFR Part 795. The DOL’s November 2026 fact sheet names control and the opportunity for profit or loss as the two core factors, with skill, permanence and integration into the business as supporting ones, and says how a requirement works in practice matters more than its label. A Littler summary adds that the rule is not a bright-line test. Confirm the dates on the Federal Register before relying on them.

States. Federal and state tests both apply and they differ. Fenwick’s 2023 startup guide notes that some states use a more demanding standard, and Littler’s summary says state laws such as California’s ABC test may still classify a worker as an employee.

Canada, CRA. The CRA treats a worker as either an employee (an employer-employee relationship) or self-employed (a business relationship), and says the actual working relationship and all its facts matter, not intentions alone. Outside Quebec it applies a two-step approach based on common law; in Quebec it applies a three-step approach based on civil law. An older CRA guide, RC4110 (now marked cancelled, modified 2023), lists the factors courts use: control, tools and equipment, ability to subcontract, financial risk, investment and management, and opportunity for profit. Either side can ask the CRA for a CPP and EI ruling.

Question IRS (US) DOL (US) CRA (Canada)
What it governs Federal employment tax Minimum wage and overtime CPP, EI and income tax
Core idea Control and independence in three groups Is the worker in business for themselves Employee or business relationship, on all the facts
Does a contract decide it? No, one factor among many No No, it shows intent only

Clauses an independent contractor agreement should include

The U.S. Chamber of Commerce guide to these agreements lists scope, payment terms, ownership of intellectual property, confidentiality, optional non-solicitation and termination. A young company that needs a workable template can start from the clauses below.

  • Scope and deliverables. Describe the work and what counts as finished. Open-ended direction pushes a relationship toward employment.
  • Payment. State the rate or fixed fee, invoice timing and expense rules. The IRS lists who reimburses expenses as a financial-control factor, so decide this on purpose.
  • Term. Choose a project end date or a renewal rule. The IRS looks at whether the relationship is expected to continue, so long exclusive engagements carry more status risk.
  • IP ownership and work for hire. Covered in the next section.
  • Confidentiality. Contractors often serve several clients, so the agreement should protect what stays private and say for how long. The Canadian Trade Commissioner Service says contractors should at least be under a non-disclosure agreement.
  • Termination. Say how either side can end the deal and what happens to work in progress and final payment.
  • Liability. Set who bears losses caused by the contractor’s work and whether the contractor carries insurance. A lawyer should draft any cap or indemnity.
  • Independence language. The contractor handles its own taxes, tools and schedule. Fenwick warns that a worker’s waiver of employee rights is unenforceable, so the text helps only when reality matches it.

Why IP ownership matters, and why investors check it

Under U.S. copyright law (17 U.S.C. sections 201 and 101), copyright starts with the author. A work made for hire is authored by the employer, but a commissioned work counts as one only if it falls in nine listed categories (for example a translation, a compilation or a test) and both parties sign a written agreement saying so. The list does not mention software as such. Section 204(a) adds that a transfer of copyright ownership is not valid without a signed writing. In practice, a contractor who writes your code or designs may own it until a signed document says otherwise. So agreements usually pair a work-for-hire line with an assignment of all rights in the deliverables.

Stripe Atlas recommends getting signed IP assignments from everyone who works for the company, including short-term contractors. Investors ask for the same thing. The Canadian Trade Commissioner Service (2022) says every IP right should show a clear chain of assignment from the original inventors to the company, and gives an example where a missing founder assignment led an investor to cut the valuation sharply. A July 2026 WIPO guide lists contracts, development agreements and copyright assignments among the documents investors review. Those papers belong in the data room, and our overview of startup IP basics covers trademarks and patents. For the founders themselves, the same logic is part of a co-founder agreement.

Misclassification risk

Calling someone a contractor does not make them one. Fenwick says lawsuits can require back taxes and the value of benefits the worker should have received, that audits often begin when a former contractor files for unemployment benefits and can reach several prior years, and that officers and directors can face personal exposure. It adds that investors and buyers may see misclassification as an inherited liability.

The IRS Voluntary Classification Settlement Program (page reviewed September 8, 2026) lets companies reclassify workers going forward. Eligible taxpayers must have filed all required 1099s for the previous three years and must not be under an IRS, DOL or state audit over the same workers. The payment is 10 percent of the employment tax that would have been due for the most recent year, computed at reduced section 3509(a) rates, with no interest or penalties on it. Applicants file Form 8952 at least 120 days before the new treatment starts.

A hypothetical example: a startup hires a designer for a three-month brand project at a fixed fee. The designer picks her hours, uses her own software and has other clients. That fits a contractor. If the startup later asks her to work 40 hours a week on site, follow a daily checklist and drop other clients, the paper is the same but the facts lean toward employment.

Paying independent contractors: 1099-NEC in the US, T4A in Canada

United States. The IRS instructions for Forms 1099-MISC and 1099-NEC (revised December 2026) say to report nonemployee compensation of $2,000 or more in box 1a, a threshold that applies to tax years beginning after 2025 and may be adjusted for inflation starting in 2027. The form is due January 31, and payee statements are due by the same date. Backup withholding triggers a filing at any amount. Payments to corporations are generally exempt, with exceptions such as attorneys’ fees. Collect a Form W-9 before the first payment so you have the contractor’s taxpayer identification number. Tidy records are part of normal bookkeeping for startups.

Canada. The CRA’s fees-for-service fact sheet (modified April 14, 2026) says total payments over $500 in a calendar year must be reported, usually in box 048 of a T4A slip, and that slips go to recipients by the last day of February of the following year. The fact sheet is aimed at businesses paying other businesses, and it says trucking businesses face penalties for missing reports starting with the 2025 tax year. Check the guidance for your situation.

International contractors

Hiring abroad adds a second tax system. Two facts could be verified:

  • Canada. CRA guide IC75-6 says anyone paying a non-resident for services performed in Canada must withhold 15 percent of the payment and remit it by the 15th of the following month. The rule applies whether the payer is an individual, a corporation or a trust.
  • United States. The IRS says U.S.-source fixed, determinable, annual or periodical income paid to nonresident aliens is generally taxed at a flat 30 percent unless a lower treaty rate applies (page reviewed February 2026). A foreign individual gives Form W-8BEN to the payer to certify foreign status, and the IRS page (reviewed October 2026) does not describe it as a form filed with the IRS.

Where the work is performed matters in both countries. Record the contractor’s country of residence, the place of work and the tax forms collected, and have a cross-border adviser review them before the first payment.

Questions readers ask

Can we just label someone an independent contractor in the contract? No. The IRS, the DOL and the CRA each weigh the real relationship, and the DOL says titles, contracts and 1099 forms do not decide status.

Is a work-for-hire clause enough to own a contractor’s code? Not always. In U.S. law a commissioned work qualifies as work made for hire only in nine listed categories with a signed writing, so agreements usually add an assignment of rights.

Does the $2,000 1099-NEC threshold mean small payments are not income? No. The threshold decides who gets a form, not what is taxable. The contractor still reports the income.

What should founders sort out first? Collect signed IP assignments from everyone who touched the product, then review who is on contractor terms and why. The founders hub lists related guides.

Sources and limits

All statements above come from pages read in November 2026. Pages that could not be read were not cited. Fenwick, Stripe, Chamber, Trade Commissioner, WIPO and Littler statements were carried over from the first draft and not re-read in the second check.

  • IRS (irs.gov): contractor or employee page (May 19, 2026), 1099-MISC and 1099-NEC instructions (December 2026), VCSP (September 8, 2026), nonresident alien taxation (February 17, 2026), Form W-8 BEN (October 2, 2026)
  • U.S. Department of Labor, Misclassification page, Fact Sheet 13 (dol.gov, revised March 2024) and the November 2026 Fact Sheet 13; Federal Register document 2026-23777 (91 FR 75646, federalregister.gov)
  • Littler, “DOL releases final rule regarding independent contractor status” (littler.com, November 2026)
  • Canada Revenue Agency, employment status pages (canada.ca, 2025 and 2026), RC4110 (cancelled, 2023), fees-for-service fact sheet (April 2026) and IC75-6 on non-resident services
  • Legal Information Institute, 17 U.S.C. sections 101, 201 and 204 (law.cornell.edu)
  • Fenwick, “Startup Guide to Hiring and Terminations: Worker Classification” (fenwick.com, August 17, 2023)
  • Stripe Atlas, employment guide (stripe.com)
  • U.S. Chamber of Commerce, contractor agreement guide (uschamber.com)
  • Canadian Trade Commissioner Service (2022) and WIPO (July 2026) on IP due diligence

This is general information, not legal, tax or investment advice. Tests, thresholds and withholding rules differ by country, state and province, and they change. Ask a qualified lawyer and tax adviser before relying on anything here.